Geotech Submersible Water Level Transmitter
BRAND: Geotech Environmental
Shipping: This item ships in approximately 5 - 7 days
Geotech's submersible pressure transducers are designed for ruggedness and long life to meet the harsh environments encountered in liquid level measurement and control.
Features
High static accuracy and repeatability
100% computer tested, calibrated and temperature compensated
750' (229m) maximum cable length
All wetted materials are #316 stainless steel
Sensor has ¼" NPT process fitting with protective cap
Vent line in cable allows barometric compensation of level readings
Field replaceable desiccant cartridge or Aneroid Bellows for moisture protection
Optional surge suppressor for lightning protection
BRAND: Geotech Environmental
Shipping: This item ships in approximately 5 - 7 days
Geotech's submersible pressure transducers are designed for ruggedness and long life to meet the harsh environments encountered in liquid level measurement and control.
Features
High static accuracy and repeatability
100% computer tested, calibrated and temperature compensated
750' (229m) maximum cable length
All wetted materials are #316 stainless steel
Sensor has ¼" NPT process fitting with protective cap
Vent line in cable allows barometric compensation of level readings
Field replaceable desiccant cartridge or Aneroid Bellows for moisture protection
Optional surge suppressor for lightning protection
BRAND: Geotech Environmental
Shipping: This item ships in approximately 5 - 7 days
Geotech's submersible pressure transducers are designed for ruggedness and long life to meet the harsh environments encountered in liquid level measurement and control.
Features
High static accuracy and repeatability
100% computer tested, calibrated and temperature compensated
750' (229m) maximum cable length
All wetted materials are #316 stainless steel
Sensor has ¼" NPT process fitting with protective cap
Vent line in cable allows barometric compensation of level readings
Field replaceable desiccant cartridge or Aneroid Bellows for moisture protection
Optional surge suppressor for lightning protection
-
-
Electrical:
Supply Voltage 12-36 Volt DC
Supply Current 25 mA
Output 1-5 Volt DC, 4-20 mA, and Modbus 485
Performance:
Pressure Ranges (psi)
0-3, 0-5, 0-15, 0-30, 0-50, 0-100, 0-150
Pressure Ranges (bar)
0-.2, 0-.34, 0-1, 0-2, 0-3.5, 0-7, 0-10
(Custom ranges available)Accuracy:
0.25% of full scale
0.1% of full scale available
Non-Linearity .07% of full scale
Repeatability 0.015% of full scale
Pressure Hysteresis 0.010% of full scale
Zero Error ±0.1% of full scale
Span Error ±0.1% of full scale
Temperature Sensor Range -40° to 257°F (-40° to 125°C)*
Temperature Accuracy
±1.8°F (0.5°C) nominal full scale
Temperature reporting is only available with RS485 communications.Compensated Temperature -4° to 185°F (-20° to 85°C)
Operating Temperature -40° to 257°F (-40° to 125°C)
Response Time 2 millisecondsLife 1 million pressure cycles
Physical:
Sensor Length:
(Includes 2" Strain Relief) With Surge Suppressor
Without Surge Suppressor 8.6" (21.8 cm) 7.7" (19.6 cm)Sensor Diameter .72" (1.8 cm)
Sensor Weight 4.3 oz. (122 g)
Proof Pressure 3x psi
Burst Pressure 5x psi
Media Compatibility Liquids or gasses compatible with 316 stainless steel
Cable:
Jacket: Polyurethane or Tefzel® (Vented)
Diameter: .335" to .360" (8.5mm to 9.14mm)
Conductors: 4-24 AWG 7/32 tinned copper Red – White – Blue – Orange
Drain: 24 AWG 7/32 tinned copper bare
Vent Tube: Nylon 6/6 vent tube