WQ730 Turbidity Sensor (Discontinued)
Brand: Global Water/Xylem
The ideal choice for long-term deployment or spot turbidity measurements in water quality testing and management, river monitoring, stream measurement, reservoir water quality testing, groundwater testing, water and wastewater treatment, effluent and industrial control.
Features
Dual Channel 0 - 50 NTU and 0 - 1000NTU
Industrial 4 - 20 mA Output
Easy integration to SCADA, PLC, Data Recorders and Other 4- 20 mA Compatatible Displays
Marine-grade cable with strain relief
In-situ turbidity measurement
Simple and convenient to use
Rugged stainless steel and Delrin sensor housing
Available in a variety of cable lengths
(This product has been discontinued by the manufacturer) See our other turbidity sensors
Brand: Global Water/Xylem
The ideal choice for long-term deployment or spot turbidity measurements in water quality testing and management, river monitoring, stream measurement, reservoir water quality testing, groundwater testing, water and wastewater treatment, effluent and industrial control.
Features
Dual Channel 0 - 50 NTU and 0 - 1000NTU
Industrial 4 - 20 mA Output
Easy integration to SCADA, PLC, Data Recorders and Other 4- 20 mA Compatatible Displays
Marine-grade cable with strain relief
In-situ turbidity measurement
Simple and convenient to use
Rugged stainless steel and Delrin sensor housing
Available in a variety of cable lengths
(This product has been discontinued by the manufacturer) See our other turbidity sensors
Brand: Global Water/Xylem
The ideal choice for long-term deployment or spot turbidity measurements in water quality testing and management, river monitoring, stream measurement, reservoir water quality testing, groundwater testing, water and wastewater treatment, effluent and industrial control.
Features
Dual Channel 0 - 50 NTU and 0 - 1000NTU
Industrial 4 - 20 mA Output
Easy integration to SCADA, PLC, Data Recorders and Other 4- 20 mA Compatatible Displays
Marine-grade cable with strain relief
In-situ turbidity measurement
Simple and convenient to use
Rugged stainless steel and Delrin sensor housing
Available in a variety of cable lengths
(This product has been discontinued by the manufacturer) See our other turbidity sensors
This turbidity Sensor is a highly accurate submersible instrument for in-situ environmental or process monitoring. Applications for the WQ730 include: water quality testing and management, river monitoring, stream measurement, reservoir water quality testing, groundwater testing, water and wastewater treatment, and effluent and industrial control. In accordance with USEPA Method 180.1 for turbidity measurement, the WQ730 Turbidity Sensors are a 90 degree scatter nephelometer. The WQ730 turbidity sensor directs a focused beam into the monitored water. The light beam reflects off particles in the water, and the resultant light intensity is measured by the turbidity sensor’s photodetector positioned at 90 degrees to the light beam. The light intensity detected by the turbidity sensor is directly proportional to the turbidity of the water. The WQ730 utilizes a second light detector to correct for light intensity variations, color changes, and minor lens fouling. For environmental or process monitoring, simply place the turbidity sensor directly in the water and position it where the turbidity is to be monitored. Since the turbidity sensor uses light to detect the water’s turbidity ensure that the minimum amount of external light possible is exposed to the monitoring site.
Specifications
Range: Sensor=0-50 NTU and 0-1000 NTU; Meter=0-50 NTU or 0-1000 NTU selectable
Accuracy: + 1% of full scale
Meter Resolution: 12 bit
Output: 4-20mA (Sensor, both ranges), LED screen (Meter)
Method: Nephelometer with correction
Operating Voltage: 10-36 VDC @ 40 MS (Sensor); Internal 9VDC battery (Meter)
Current Draw: 30 mA plus sensor output (Sensor)
Warm-up Time: 5 seconds minimum (Sensor)
Operating Temperature: 14 to 122°F (-10 to +50°C) (Sensor); 32 to 122°F (0 to +50°C) (Meter)
Materials: 306 stainless steel, delrin, polyether jacketed cable.
Maximum Pressure: 30 psi
Light Source: Infrared LED, (880nm)
Cable Length: Sensor=25 ft standard (optional to 500 ft)
Size: Body= 1 1/2 x 8.5 inches (3.8 x 21.6 cm) (Dia x Length)
Weight: 1lb (454 g) (Sensor); 2 lbs (907 g) (Meter+sensor)
Contact us for pricing and additional information.
